Name: Newel Post 36" x 1-1/4" Square
SKU: 577
Availability: InStock

Newel Post 36″ x 1-1/4″ Square

$12.59

Newel Post 36″ x 1-1/4″ Square | 577

Black steel 36-in newel post for use with Windsor or Windsor Plus series 32-in installed height steel railing
36-in x 1-1/4-in x 1-1/4-in square 16-guage post
Installed in conjunction with 32-in Windsor Plus or Windsor railing, flange, and Bolt-Thru fitting set; all components sold separately
To be used as line, corner or end post; additional holes may be drilled as required
36-in post includes welded round cap; to be trimmed to proper height at time of installation using fine tooth hacksaw blade or metal cutting chop saw blade
Available with black, baked-on finish, only available in black finish, touch up required for cuts, scratches and scrapes
Post installed at bottom for stair angled application may need to be trimmed at different length than horizontal railing application
Intended for installation on ground; not intended for installation more than 30-in above grade
Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-inhibiting paint immediately following installation
Check local building codes, compliance with building codes is the installer’s responsibility

HEIGHT: 36 | WIDTH: 1,25 | DEPTH: 1,25

Description

Newel Post 36″ x 1-1/4″ Square | 577

Black steel 36-in newel post for use with Windsor or Windsor Plus series 32-in installed height steel railing
36-in x 1-1/4-in x 1-1/4-in square 16-guage post
Installed in conjunction with 32-in Windsor Plus or Windsor railing, flange, and Bolt-Thru fitting set; all components sold separately
To be used as line, corner or end post; additional holes may be drilled as required
36-in post includes welded round cap; to be trimmed to proper height at time of installation using fine tooth hacksaw blade or metal cutting chop saw blade
Available with black, baked-on finish, only available in black finish, touch up required for cuts, scratches and scrapes
Post installed at bottom for stair angled application may need to be trimmed at different length than horizontal railing application
Intended for installation on ground; not intended for installation more than 30-in above grade
Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-inhibiting paint immediately following installation
Check local building codes, compliance with building codes is the installer’s responsibility

HEIGHT: 36 | WIDTH: 1,25 | DEPTH: 1,25

Additional information

Weight	3 lbs
Dimensions	2 × 2 × 38 in