Oakwood Column

Oakwood 8' Flat Column 1-1/4" | 330

• Oakwood 10.5-in x 8-ft Black Steel Flat Column
• Oakwood 8-ft flat columns consist of 5 decorative "Leaf" castings and 1-1/4-in frame
• Column working load: 985 lbs
• 10-1/2-in wide x 1-1/4-in deep x 96-in high
• Installs with 2 floor/column flange, sold separately
• Strong, welded construction, coated with black, baked-on finish, touch up required
• Oakwood columns can not be cut to length
• Can be installed as stand-alone column or in conjunction with Gilpin steel railing
• Made in USA
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 96 | WIDTH: 10,5 | DEPTH: 1,25

Oakwood 8' Corner Column 1-1/4" | 338

• Oakwood 10.5-in x 8-ft Black Steel Corner Column
• Oakwood 8-ft corner columns consist of 5 decorative "Leaf" castings per side and 1-1/4-in frame
• Column working load: 2925 lbs
• 10-1/2-in wide x 10-1/2-in deep x 96-in high
• Installs with 3 floor/column flange, sold separately
• Strong, welded construction, coated with black, baked-on finish, touch up required
• Oakwood columns can not be cut to length
• Can be installed as stand-alone column or in conjunction with Gilpin steel railing
• Made in USA
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 96 | WIDTH: 10,5 | DEPTH: 10,5

Oakwood Corner Bracket | 502

• Oakwood Column Decorative Corner Bracket
• Oakwood Steel Series
• For optional use with Oakwood flat column or Oakwood corner column
• 17-in wide x 3/4-in deep x 17-in high
• Black only, baked on finish
• Cast iron bracket, ready for installation
• Used as decorative accent
• Ordered individually
• Made in USA
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 17 | WIDTH: 17 | DEPTH: 1

Newel Post Flange 1-1/4" | 579

• Floor/Column Flange to be used in conjunction with 1-1/4-in x 1-1/4-in square Windsor or Patterson steel newel posts and Newport, Windsor or Oakwood flat or corner columns. 1-1/4-in flange is ordered for use with posts or columns for field application. Flange receives 1-1/4-in steel post or 1-1/4-in column tube and is secured in place with included set screws. Must be installed on level terrain.
• For use with 1-1/4-in x 1-1/4-in steel newel post and steel columns
• 1-1/4-in floor flange used to install 1-1/4-in newel post
• One flange required per newel post
• Install using masonry anchors or lag bolts, sold separately
• Flange ordered individually, posts and columns sold separately
• Intended for use on flat surfaces only
• Baked on, black finish
• Panels, posts, brackets and other components sold separately
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 2,25 | WIDTH: 3,125 | DEPTH: 3,125