Rail Panel (Hampton)

Hampton 4'W Railing 36"H, 4" Spindle Spacing | 604

• Hampton Black Steel Square Spindle Deck Railing (48-in x 32-in x 1-1/4-in actual size)
• Hampton railing installed height 36-in, spindle spacing 4-in on center
• Hampton railing utilizes 1-1/4-in sculpted top and bottom channel with square spindles and easily adjusts for angled stair application
• Installed in conjunction with 37-in newel post, flange, and bracket fitting set; all components sold separately
• Strong, welded construction, coated with black, baked-on finish, only available in black finish, touch up required
• Hampton railing can be cut to custom width using fine tooth hacksaw blade or metal blade chop saw
• Factory built with 2 pcs of 1-1/4-in wide crossrails and 11 pcs of 1/2-in square hollow tube spindles
• Intended for installation on ground; not intended for installation more than 30-in above grade
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 32 | WIDTH: 48 | DEPTH: 1,25

Hampton 6'W Railing 36"H, 4" Spindle Spacing | 605

• Hampton Black Steel Square Spindle Deck Railing (72-in x 32-in x 1-1/4-in actual size)
• Hampton railing installed height 36-in, spindle spacing 4-in on center
• Hampton railing utilizes 1-1/4-in sculpted top and bottom channel with square spindles and easily adjusts for angled stair application
• Installed in conjunction with 37-in newel post, flange, and bracket fitting set; all components sold separately
• Strong, welded construction, coated with black, baked-on finish, only available in black finish, touch up required
• Hampton railing can be cut to custom width using fine tooth hacksaw blade or metal blade chop saw
• Factory built with 2 pcs of 1-1/4-in wide crossrails and 11 pcs of 1/2-in square hollow tube spindles
• Intended for installation on ground; not intended for installation more than 30-in above grade
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 32 | WIDTH: 72 | DEPTH: 1,25