Flanges/Fasteners (Windsor Plus)

Newel Post Flange 1-1/4" | 579

• Floor/Column Flange to be used in conjunction with 1-1/4-in x 1-1/4-in square Windsor or Patterson steel newel posts and Newport, Windsor or Oakwood flat or corner columns. 1-1/4-in flange is ordered for use with posts or columns for field application. Flange receives 1-1/4-in steel post or 1-1/4-in column tube and is secured in place with included set screws. Must be installed on level terrain.
• For use with 1-1/4-in x 1-1/4-in steel newel post and steel columns
• 1-1/4-in floor flange used to install 1-1/4-in newel post
• One flange required per newel post
• Install using masonry anchors or lag bolts, sold separately
• Flange ordered individually, posts and columns sold separately
• Intended for use on flat surfaces only
• Baked on, black finish
• Panels, posts, brackets and other components sold separately
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 2,25 | WIDTH: 3,125 | DEPTH: 3,125

Lag Bolts 4pc Bag | 630

• Lag bolts attach the post/column flange to a wood surface
• Package contains 4 lag bolts 1-3/4-in x 1/4-in
• Installs into wood, flat surfaces securing flange in place
• One package required per post flange
• Ordered per package
• Intended for use with flange on flat surfaces only
• Baked on, black finish
• Lag Bolts only, flange sold separately
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint after installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 1,75 | WIDTH: 0,375 | DEPTH: 0,25

Masonry Anchors 4pc Bag | 583

• Masonry anchors attach the post/column flange to a concrete surface
• Package contains 4 anchors 1-3/4-in x 1/4-in with 4 black locking nuts
• Installs into concrete, flat surfaces securing flange in place
• One package required per post flange
• Ordered per package
• Intended for use with flange on flat surfaces only
• Baked on, black finish
• Masonry Anchors only, flange sold separately
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint after installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 1,75 | WIDTH: 0,375 | DEPTH: 0,25