Newel Post (Hampton)

Newel Post w/Flange 37" x 1-1/2" Square | 878

• Black steel 37-in newel post intended for use with 36-in installed height steel railing
• 37-in x 1-1/2-in x 1-1/2-in square steel newel post with welded flange
• Installed as surface-mount application in conjunction with 36-in Hampton railing and fitting set; all components sold separately
• To be used as line, corner or end post; additional holes may be drilled as required
• 37-in post includes welded square flat cap and welded flange
• Available with black, baked-on finish, only available in black finish, touch up required for cuts, scratches and scrapes
• Post installed at bottom for stair angled application may need to be longer or different length than horizontal railing application
• Intended for installation on ground; not intended for installation more than 30-in above grade
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-inhibiting paint immediately following installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 37 | WIDTH: 1,5 | DEPTH: 1,5

Newel Post 48" x 1-1/4" Square | 670

• Black steel 48-in newel post for use with Patterson series 36-in installed height steel railing. Can be used with other series when a longer post is desired
• 48-in x 1-1/4-in x 1-1/4-in square 16-guage post
• Installed in conjunction with 36-in Patterson railing, flange, and Bolt-Thru fitting set; can be used with other railings if longer post is desired; all components sold separately
• To be used as line, corner or end post; additional holes may be drilled as required
• 48-in post includes welded round cap; to be trimmed to proper height at time of installation using fine tooth hacksaw blade or metal cutting chop saw blade
• Available with black, baked-on finish, only available in black finish, touch up required for cuts, scratches and scrapes
• Post installed at bottom for stair angled application may need to be trimmed at different length than horizontal railing application
• Intended for installation on ground; not intended for installation more than 30-in above grade
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-inhibiting paint immediately following installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 48 | WIDTH: 1,25 | DEPTH: 1,25

Newel Post 66" x 1-1/2" Square | 867

• Black steel 66-in newel post intended for use when longer length or in-ground application is necessary
• 66-in x 1-1/2-in x 1-1/2-in square steel newel post without flange
• Installed as structural application or in-ground application with railing and fitting set when longer length is required; all components sold separately
• To be used as line, corner or end post; additional holes may be drilled as required
• 66-in post includes welded square flat cap; for installation when needed for structural application or in-ground application or when longer length is required
• Available with black, baked-on finish, only available in black finish, touch up required for cuts, scratches and scrapes
• Post installed at bottom for stair angled application may need to be longer or different length than horizontal railing application
• Intended for installation on ground; not intended for installation more than 30-in above grade
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-inhibiting paint immediately following installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 66 | WIDTH: 1,5 | DEPTH: 1,5