Post(s)

Newel Post 36" x 1-1/4" Square | 577

• Black steel 36-in newel post for use with Windsor or Windsor Plus series 32-in installed height steel railing
• 36-in x 1-1/4-in x 1-1/4-in square 16-guage post
• Installed in conjunction with 32-in Windsor Plus or Windsor railing, flange, and Bolt-Thru fitting set; all components sold separately
• To be used as line, corner or end post; additional holes may be drilled as required
• 36-in post includes welded round cap; to be trimmed to proper height at time of installation using fine tooth hacksaw blade or metal cutting chop saw blade
• Available with black, baked-on finish, only available in black finish, touch up required for cuts, scratches and scrapes
• Post installed at bottom for stair angled application may need to be trimmed at different length than horizontal railing application
• Intended for installation on ground; not intended for installation more than 30-in above grade
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-inhibiting paint immediately following installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 36 | WIDTH: 1,25 | DEPTH: 1,25

Newel Post 48" x 1-1/4" Square | 670

• Black steel 48-in newel post for use with Patterson series 36-in installed height steel railing. Can be used with other series when a longer post is desired
• 48-in x 1-1/4-in x 1-1/4-in square 16-guage post
• Installed in conjunction with 36-in Patterson railing, flange, and Bolt-Thru fitting set; can be used with other railings if longer post is desired; all components sold separately
• To be used as line, corner or end post; additional holes may be drilled as required
• 48-in post includes welded round cap; to be trimmed to proper height at time of installation using fine tooth hacksaw blade or metal cutting chop saw blade
• Available with black, baked-on finish, only available in black finish, touch up required for cuts, scratches and scrapes
• Post installed at bottom for stair angled application may need to be trimmed at different length than horizontal railing application
• Intended for installation on ground; not intended for installation more than 30-in above grade
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-inhibiting paint immediately following installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 48 | WIDTH: 1,25 | DEPTH: 1,25