Accessory(s)

Bolt-Thru Fitting Railing Bracket | 438

• Black steel Bolt-thru fitting set bracket attachment for use to install Patterson, Windsor Plus or Windsor steel railing to posts
• Package contains brackets, bolts and lock nuts to install one railing panel
• Bolt-thru fitting set used to attach railing to steel post
• Installed with railing on flat, horizontal application and also angled, stair application by bending L-shaped bracket to desired angle
• Ordered per package
• Used with posts in corner, line or end configurations
• Baked on, black finish
• Bracket package only, post and railing sold separately
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint after installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 1,75 | WIDTH: 1,5 | DEPTH: 0,625

Newel Post Flange 1-1/4" | 579

• Floor/Column Flange to be used in conjunction with 1-1/4-in x 1-1/4-in square Windsor or Patterson steel newel posts and Newport, Windsor or Oakwood flat or corner columns. 1-1/4-in flange is ordered for use with posts or columns for field application. Flange receives 1-1/4-in steel post or 1-1/4-in column tube and is secured in place with included set screws. Must be installed on level terrain.
• For use with 1-1/4-in x 1-1/4-in steel newel post and steel columns
• 1-1/4-in floor flange used to install 1-1/4-in newel post
• One flange required per newel post
• Install using masonry anchors or lag bolts, sold separately
• Flange ordered individually, posts and columns sold separately
• Intended for use on flat surfaces only
• Baked on, black finish
• Panels, posts, brackets and other components sold separately
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 2,25 | WIDTH: 3,125 | DEPTH: 3,125

Masonry Anchors 4pc Bag | 583

• Masonry anchors attach the post/column flange to a concrete surface
• Package contains 4 anchors 1-3/4-in x 1/4-in with 4 black locking nuts
• Installs into concrete, flat surfaces securing flange in place
• One package required per post flange
• Ordered per package
• Intended for use with flange on flat surfaces only
• Baked on, black finish
• Masonry Anchors only, flange sold separately
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint after installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 1,75 | WIDTH: 0,375 | DEPTH: 0,25

Lag Bolts 4pc Bag | 630

• Lag bolts attach the post/column flange to a wood surface
• Package contains 4 lag bolts 1-3/4-in x 1/4-in
• Installs into wood, flat surfaces securing flange in place
• One package required per post flange
• Ordered per package
• Intended for use with flange on flat surfaces only
• Baked on, black finish
• Lag Bolts only, flange sold separately
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint after installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 1,75 | WIDTH: 0,375 | DEPTH: 0,25

Lambs Tongue Post Ornament | 437

• Lambs Tongue post ornament installed to post using hardware from bolt-thru fitting bracket attachment
• Cast aluminum ornament to be used with 1-1/4-in Patterson, Windsor Plus or Windsor post
• Optional ornament to be installed onto end post
• Lambs Tongue ornament is 5-1/2-in high x 1-in wide x 2-in deep
• Ordered individually
• Most commonly used in conjunction with post at bottom of stairs
• Baked on, black finish
• Ornament only, post sold separately
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint after installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 5,5 | WIDTH: 2 | DEPTH: 1

Railing Center Support Bracket | 435

• Steel railing support bracket for optional use with railing panel
• For optional use with Patterson, Hampton, Windsor Plus or Windsor series steel railing
• Offers additional strength to railing, most often used in conjunction with 6-ft railing panels
• For use beneath the bottom cross rail of railing panel
• Ordered individually
• Most commonly used one per railing panel
• Baked on, black finish
• Rail Support only, railing sold separately
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint after installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 6 | WIDTH: 4,5 | DEPTH: 1

Newel Post Support Bracket | 456

• Newel post support attaches to newel post for added rigidity and support
• For optional use with Patterson, Hampton, Windsor Plus or Windsor series steel railing
• Attaches from post to surface at a downward angle for additional strength
• Most commonly used with post on step application
• Ordered individually
• Used one per post
• Baked on, black finish
• Newel Post Support only, post sold separately
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint after installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 9 | WIDTH: 7,25 | DEPTH: 0,875

Harmony Railing Ornament | 571

• Harmony Ornament for optional use with Patterson, Windsor Plus or Windsor railing or gate
• Package contains scroll work and installation bracket for attachment to twisted spindles
• Optional scroll to be installed in field onto 5/8-in flat, twisted spindle
• Harmony ornament is 10-1/4-in tall and 8-in wide
• Ordered individually
• Most commonly used one per railing panel
• Baked on, black finish
• Ornament only, railing and gate sold separately
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint after installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 10,25 | WIDTH: 7,75 | DEPTH: 0,625