Accessory(s)

Fitting Set Railing Bracket | 865

• Black steel L-shaped bracket fitting attachment set for use to install Hampton series steel railing to posts
• Package contains brackets, bolts, lock nuts, and self-taping screw to install one railing panel
• Bracket fitting attachment used to attach railing to steel post
• Installed with railing on flat, horizontal application and also angled, stair application by bending L-shaped bracket to desired angle
• Ordered per package, one package required per railing section
• Used with posts in corner, line or end configurations
• Baked on, black finish
• Bracket package only, post and railing sold separately
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint after installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 2 | WIDTH: 1,5 | DEPTH: 0,75

Masonry Anchors 4pc Bag | 583

• Masonry anchors attach the post/column flange to a concrete surface
• Package contains 4 anchors 1-3/4-in x 1/4-in with 4 black locking nuts
• Installs into concrete, flat surfaces securing flange in place
• One package required per post flange
• Ordered per package
• Intended for use with flange on flat surfaces only
• Baked on, black finish
• Masonry Anchors only, flange sold separately
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint after installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 1,75 | WIDTH: 0,375 | DEPTH: 0,25

Lag Bolts 4pc Bag | 630

• Lag bolts attach the post/column flange to a wood surface
• Package contains 4 lag bolts 1-3/4-in x 1/4-in
• Installs into wood, flat surfaces securing flange in place
• One package required per post flange
• Ordered per package
• Intended for use with flange on flat surfaces only
• Baked on, black finish
• Lag Bolts only, flange sold separately
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint after installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 1,75 | WIDTH: 0,375 | DEPTH: 0,25

Lambs Tongue Post Ornament | 437

• Lambs Tongue post ornament installed to post using hardware from bolt-thru fitting bracket attachment
• Cast aluminum ornament to be used with 1-1/4-in Patterson, Windsor Plus or Windsor post
• Optional ornament to be installed onto end post
• Lambs Tongue ornament is 5-1/2-in high x 1-in wide x 2-in deep
• Ordered individually
• Most commonly used in conjunction with post at bottom of stairs
• Baked on, black finish
• Ornament only, post sold separately
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint after installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 5,5 | WIDTH: 2 | DEPTH: 1

Railing Center Support Bracket | 435

• Steel railing support bracket for optional use with railing panel
• For optional use with Patterson, Hampton, Windsor Plus or Windsor series steel railing
• Offers additional strength to railing, most often used in conjunction with 6-ft railing panels
• For use beneath the bottom cross rail of railing panel
• Ordered individually
• Most commonly used one per railing panel
• Baked on, black finish
• Rail Support only, railing sold separately
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint after installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 6 | WIDTH: 4,5 | DEPTH: 1

Newel Post Support Bracket | 456

• Newel post support attaches to newel post for added rigidity and support
• For optional use with Patterson, Hampton, Windsor Plus or Windsor series steel railing
• Attaches from post to surface at a downward angle for additional strength
• Most commonly used with post on step application
• Ordered individually
• Used one per post
• Baked on, black finish
• Newel Post Support only, post sold separately
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint after installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 9 | WIDTH: 7,25 | DEPTH: 0,875