Post(s)

Newel Post 66" x 1-1/2" Square | 867

• Black steel 66-in newel post intended for use when longer length or in-ground application is necessary
• 66-in x 1-1/2-in x 1-1/2-in square steel newel post without flange
• Installed as structural application or in-ground application with railing and fitting set when longer length is required; all components sold separately
• To be used as line, corner or end post; additional holes may be drilled as required
• 66-in post includes welded square flat cap; for installation when needed for structural application or in-ground application or when longer length is required
• Available with black, baked-on finish, only available in black finish, touch up required for cuts, scratches and scrapes
• Post installed at bottom for stair angled application may need to be longer or different length than horizontal railing application
• Intended for installation on ground; not intended for installation more than 30-in above grade
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-inhibiting paint immediately following installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 66 | WIDTH: 1,5 | DEPTH: 1,5

72" In-ground Fence Post 2" Square | 875

• 72-in, in-ground 2" blank post for line, corner or end application with 48-in steel fence panel, black
• Steel fence post for use with Metalist, Deco, Oasis or Triton series fence products
• 72-in x 2-in square steel fence post without flange
• Steel fence post for in-ground application with 48-in fence panel
• Used with Metalist, Deco, Oasis or Triton fence panels
• Post includes welded flat cap
• Each post sold individually
• Panel and attachment fitting set sold separately
• Available in black only, baked on finish
• Maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-resistant paint

HEIGHT: 72 | WIDTH: 2 | DEPTH: 2

Newel Post w/Flange 43" x 1-1/2" Square | 879

• Black steel 43-in newel post intended for use with 42-in installed height steel railing
• 43-in x 1-1/2-in x 1-1/2-in square steel newel post with welded flange
• Installed as surface-mount application in conjunction with 42-in Hampton railing and fitting set; all components sold separately
• To be used as line, corner or end post; additional holes may be drilled as required
• 43-in post includes welded square flat cap and welded flange
• Available with black, baked-on finish, only available in black finish, touch up required for cuts, scratches and scrapes
• Post installed at bottom for stair angled application may need to be longer or different length than horizontal railing application
• Intended for installation on ground; not intended for installation more than 30-in above grade
• Some maintenance required; mounting hardware, cuts, holes and scrapes must be painted with rust-inhibiting paint immediately following installation
• Check local building codes, compliance with building codes is the installer's responsibility

HEIGHT: 43 | WIDTH: 1,5 | DEPTH: 1,5